ak-gpg: new flag --verify-file <file>

12 files changed, 2 insertions, 55 deletions

diff --git a/bin/ak-cjdns b/bin/ak-cjdns
index cff1589..3abc254 100755
--- a/bin/ak-cjdns
+++ b/bin/ak-cjdns
@@ -5,13 +5,9 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    --check                     Check for binaries
-##
 ##    --install                   Install cjdns
-##
 ##    --connect                   Connect to ak cjdns nodes
-##
 ##    --ip                        Returns your cjdns IPv6
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-clean b/bin/ak-clean
index 2411190..8d28d74 100755
--- a/bin/ak-clean
+++ b/bin/ak-clean
@@ -10,7 +10,6 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    -c, --clean                 Removes all /tmp/aktmp* directories
 ##
 
diff --git a/bin/ak-config b/bin/ak-config
index 49eec45..4418ba3 100755
--- a/bin/ak-config
+++ b/bin/ak-config
@@ -3,13 +3,9 @@
 ## Usage:    ak-config [ -h | --help | --show | --publish | --get-published ]
 ##
 ##     -h, --help       Show this help screen
-##
 ##     --show           Show current configuration (from FileSystem)
-##
 ##     --publish        Publish current configuration
-##
 ##     --get-published  Get published ak-config (from IPFS)
-##
 ##     --get-ipns-key   Get the ak-config IPNS key
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-gpg b/bin/ak-gpg
index 23c3726..2c8bbdc 100755
--- a/bin/ak-gpg
+++ b/bin/ak-gpg
@@ -5,39 +5,25 @@
 ## Usage:
 ##
 ##    -h, --help                          Prints this help message
-##
 ##    --get-key-self-as-ipfs              Returns your key as an IPFS hash
-##
 ##    --get-key-self-as-fingerprint       Returns the fingerprint of your key
-##
 ##    --get-key-fingerprint-from-ipfs     Returns the fingerprint of a given key
-##
 ##    --export-key-self-to-file           Exports self public key as 'self.pub'
-##
 ##    --clear-sign <file> <output>        Sign a file clearly
-##
+##    --verify-file <file>                Verify a clear signed file
 ##    -l, --list-keys                     Returns a list of known GPG keys
-##
 ##    -lp, --list-keys-plain              Returns a list of known GPG keys as
 ##                                        plain GPG output
-##
 ##    -ll, --list-keys-long               Returns a list of known GPG keys with
 ##                                        their 1st uid
-##
 ##    -ls, --list-secret-keys             Returns a list of secret GPG keys
-##
 ##    -lsp, --list-secret-keys-plain      Returns a list of secret GPG keys as
 ##                                        plain GPG output
-##
 ##    -lsl, --list-secret-keys-long       Returns a list of secret GPG keys with
 ##                                        their 1st uid
-##
 ##    -c, --create-key <email>            Creates a GPG key with a label <email>
-##
 ##    -s, --select-key                    Selects the GPG key you want to use
-##
 ##    -d, --delete-key                    Delete GPG keys from your keyring
-##
 ##    -ds, --delete-secret-key <fingerprint>
 ##                                        Delete GPG keys from your keyring
 ##
@@ -62,6 +48,7 @@ if [ ! -z $1 ]; then
         --get-key-fingerprint-from-ipfs) _ak_gpg_key_get_fingerprint_from_ipfs $1; exit;;
         --export-key-self-to-file) _ak_gpg_key_self_export 'self.pub'; exit;;
         --clear-sign) shift; _ak_gpg_sign_clear "$2" "$1"; exit;;
+        --verify-file) shift; _ak_gpg_verify_clear_signature "$1"; exit;;
         --list-keys | -l) _ak_gpg_list_keys; exit;;
         --list-keys-long | -ll) _ak_gpg_list_keys_long; exit;;
         --list-keys-plain | -lp) _ak_gpg_list_keys_plain; exit;;
diff --git a/bin/ak-log b/bin/ak-log
index d22da70..3e7f8b6 100755
--- a/bin/ak-log
+++ b/bin/ak-log
@@ -5,15 +5,11 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    -f, --follow                Follows the log file as its appended with new
 ##                                messages
-##
 ##    -m, --message <program> <type> <message>
 ##                                Adds a log message to the log
-##
 ##    -r, --rotate                Cleans up log files after archiving them
-##
 ##    -g, --grep                  Select a script to view only logs from that
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-network b/bin/ak-network
index 02bee20..5cafd86 100755
--- a/bin/ak-network
+++ b/bin/ak-network
@@ -5,17 +5,13 @@
 ## Usage:
 ##
 ##    -h, --help                           Prints this help message
-##
 ##    -c, --connect [ipfs|cjdns]           Connect to network(s)
-##
 ##    -p, --peers [ipfs|cjdns|stellar]     Outputs peers found
-##
 ##    -s, --scan [ipfs|cjdns|stellar]      Scan network(s) for peers
 ##
 ## Bonus: CJDNS network scanning modes
 ##
 ##    -s, --scan cjdns [-w|--whole]        Scan using HIA's knowledge
-##
 ##    -s, --scan cjdns [-d|--dump]         Scan using CJDNS' dumpLinks (default)
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-node-info b/bin/ak-node-info
index 42f6822..b3933c1 100755
--- a/bin/ak-node-info
+++ b/bin/ak-node-info
@@ -5,9 +5,7 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    --ipfs
-##
 ##    --ipns
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-profile b/bin/ak-profile
index 67b67d1..a595080 100755
--- a/bin/ak-profile
+++ b/bin/ak-profile
@@ -6,14 +6,10 @@
 ## Usage:
 ##
 ##     -h, --help                      Prints this help message
-##
 ##     -l, --local-index               Show current status
-##
 ##     --show <data IPFS CIDv0>        Show profile entry from specified DATA
 ##                                     IPFS CIDv0
-##
 ##     -s, --set <property> <value>    Sets a profile value
-##
 ##     -g, --get <property>            Gets a profile value from the on-disk
 ##                                     file.
 ##
@@ -22,7 +18,6 @@
 ##     -a, --add <file>                Creates a data file from the profile file
 ##                                     you point (file should already be in
 ##                                     ZPROFILEDIR).
-##
 ##     -i, --import <folder>           Import a folder to zchain #TODO
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-sblock b/bin/ak-sblock
index 68e6870..3766b96 100755
--- a/bin/ak-sblock
+++ b/bin/ak-sblock
@@ -5,7 +5,6 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    -s, --show <sblock-hash>    Show a particular SBLOCK
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-schain b/bin/ak-schain
index 5d4a442..3164eeb 100755
--- a/bin/ak-schain
+++ b/bin/ak-schain
@@ -5,9 +5,7 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    -c, --crawl                 Crawl an schain or latest known
-##
 ##    -l, --get-latest            Returns latest sblock from saved sblocks. The
 ##                                latest sblock would belong to the longest
 ##                                schain if more than one schains found.
diff --git a/bin/ak-settings b/bin/ak-settings
index 45fca1e..d2c87fb 100755
--- a/bin/ak-settings
+++ b/bin/ak-settings
@@ -5,10 +5,8 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    -g, --get [key]             Gets all the settings or, in case key is set,
 ##                                returns only the key-value specified
-##
 ##    -s, --set <key> <value>     Sets the settings.key to value
 ##
 fullprogrampath="$(realpath $0)"
diff --git a/bin/ak-zchain b/bin/ak-zchain
index 73d38ba..eabd9a4 100755
--- a/bin/ak-zchain
+++ b/bin/ak-zchain
@@ -5,7 +5,6 @@
 ## Usage:
 ##
 ##    -h, --help                  Prints this help message
-##
 ##    -r, --reset                 Reset zchain
 ##                                Backs up your latest block into IPFS
 ##                                filesystem, replaces it with an empty file
@@ -15,7 +14,6 @@
 ##                                This program, does NOT delete anything from
 ##                                your IPFS repository, neither denies access to
 ##                                previously created blocks.
-##
 ##    --rebase <zblock>           Rebase zchain to a zblock
 ##                                Backs up your latest block into IPFS
 ##                                filesystem, replaces it with a zblock and
@@ -25,24 +23,15 @@
 ##                                This program, does NOT delete anything from
 ##                                your IPFS repository, neither denies access to
 ##                                previously created blocks.
-##
 ##    --rebase-back-one           Rebase zchain one zblock back
-##
 ##    --extract-cids              Extracts IPFS CIDv0 links of a zchain
-##
 ##    --extract-data-cids         Extracts data IPFS CIDv0 links from a zchain
-##
 ##    --calculate-size            Calculates the size of a zchain
-##
 ##    --crawl                     Crawls zchains ( --crawl --help for more
 ##                                options)
-##
 ##    --crawl-self                Crawls the local zchain
-##
 ##    --crawl-remote-ipfs         Crawls a remote zchain
-##
 ##    --crawl-remote-ipns         Crawls a remote zchain from ipns key
-##
 ##    --get-latest                Returns the latest zblock from your zchain
 ##
 fullprogrampath="$(realpath $0)"